Supply Stainless Steel Welding Electrodes Aws E309 E309l

Suministro de electrodos de soldadura de acero inoxidable Aws E309 E309l

TheweldmetalofE309/309Lcontainsmore Cr Ni thanE 308/308L.

Detalles del producto

Contáctanos ahora

Detalles del producto

Characteristics and Applications

TheweldmetalofE309/309Lcontainsmore Cr Ni thanE 308/308L. It contains suitable quantity ferrite in microstructure, gives it an excellent resistance to hot cracking. it is designed for dissimilar meta welding ofjoining mild steel to stainless steel, hardening alloy steel and steel with poor weldability. Prop base metals are including stainless steel plate, steel strip, steel tube, heat transfer tube, pressure vess steel bar, casting and forging.

Notas sobre el uso

1.Clean up the contaminations on the base metal, groove and pass to pass with stainless steel brush
2.Maintaining short arclength aspossible is highly recommended. While welding with weave method, mov range should be controlled within 2.5 times of the wire's dia.
3. Dry the electrodes at250~300℃ for 60 minutes before use. Take out consumables for haif day consumption and keep in the environment at 100~150℃ during welding process.
4. Use lower current to prevent from cracking and minimize base metal dilution.

Descripción

Types Of Electrodes	Introduction	Usos
Model: CB-J421 GB: E4313 AWS: E6013	It is a kind of carbon steel electrode with titania type coating. AC/DC. All position welding. It has excellent welding performance, excellent operating performance, easy reignition, stable arc, beautiful appearance of weld.	For welding low carbon steel structures, especially suitable for welding on thin plates and cometic welding which requires the weld beads to be beautiful and glossy.
Model: CB-J425 GB: E4311 AWS: E6011	It is a kind of carbon steel electrode with cellulose potassium type coating. AC/DC. It has excellent welding performance, beautiful appearance after vertical downward welding, fewer slags and high welding efficiency.	Suitable for butt welding, fillet welding and lap welding on thin plates, such as low carbon steel structures like flues of power stations, air ducts, transformer oil tanks, hulls, exterior panels of cars, etc.
Model: CB-J508 GB: E5018 AWS: E7018	It is a kind of carbon steel electrode with low hydrogen type coating. AC/DC. It has excellent welding performance, easy reignition, stable arc, beautiful appearance of weld.	Used for welding carbon steel and low alloy steel structures, such as 16Mn, etc.

Composición química del metal depositado (%)

AWS	Chemical Composition	C	Minnesota	Y	S	P
E6013	Guarantee Value	≤0,12	0.30-0.60	≤0,35	≤0,035	≤0,040
E6011	Guarantee Value	≤0,20	0.30-0.60	≤0,30	≤0,035	≤0,040
E7018	Guarantee Value	≤0,12	≤1,60	≤0,75	≤0,035	≤0,040

Mechanical Properties of Deposited Metal (%)

AWS	Test Item	Rm (Mpa)	Rel(Mpa)	A(%)	KV2(J)
E6011	Guarantee ValueGeneral Result	≥420440-450	≥330≥340	≥2222-30	≥27(-30°C)50-90(-30°C)
E6013	Guarantee ValueGeneral Result	≥420460-540	≥330≥340	≥1718-26	-(0°C)≥47
E7018	Guarantee Value	≥490	≥400	≥22	≥27(-30°C)

Reference Current(AC, DC)

AWS	Electrode Diameter(mm)	φ2.5	φ3.2	φ4.0	φ5.0
E6013	Welding Current(A)	50-90	90-130	130-210	170-230
E6011	Welding Current(A)	30-50	80-100	110-130	150-200
E7018	Welding Current(A)	60-100	80-140	110-210	160-230

Embalaje

Nuestra fábrica

Exhibición

Nuestra Certificación

Contáctanos

Si está interesado en nuestros productos, puede optar por dejar su información aquí y nos pondremos en contacto con usted en breve.

Aws E309 E309l FAQs

What Is AWS E309 Electrode Used For?

AWS E309 is used for welding dissimilar metals, such as stainless steel to mild or carbon steel.

What Does AWS E309 Mean?

'E' stands for electrode, '309' specifies the alloy type, suitable for stainless steel, and it provides high corrosion resistance.

What Is the Tensile Strength of AWS E309?

AWS E309 has a tensile strength of approximately 80,000 psi.

Productos relacionados

AWS E6013 Universal Carbon Steel Welding Rods 2.5mm-5.0mm

Varillas de soldadura universales de acero al carbono AWS E6013 de 2,5 mm a 5,0 mm

Self Shielded Flux Core Welding Wire E71T-GS-0.8mm-1.6mm

Alambre de soldadura con núcleo fundente autoprotegido E71T-GS de 0,8 mm a 1,6 mm

AWS E6011 Universal Carbon Steel Welding Rods 2.5mm-5.0mm

Varillas de soldadura universales de acero al carbono AWS E6011 de 2,5 mm a 5,0 mm

Varilla de soldadura de CA 6013 de China, 1/8, 3/32 y 5/32

Varilla de soldadura de la marca Copper Bridge 3/32 7018

Electrodo de China 6013

Varilla de soldadura de la marca Copper Bridge Aws 6011

China Copper Bridge Welding Electrodes 6013 6011 7018

Electrodos de soldadura de puente de cobre de China 6013, 6011 y 7018

Noticias relacionadas

2025-04-29 17:34:43

Unlocking the Strength of E316L-16 Welding Rod: The Ultimate Choice for Stainless Steel Welding

For industries that demand precision, durability, and superior corrosion resistance, the E316L-16 welding rod is an outstanding choice.

2025-04-29 17:31:58

Unlocking Superior Welding Performance with Flux Cored Welding Wire

For professionals and industries seeking enhanced efficiency and quality in welding, flux cored welding wire is the ultimate solution.

2025-04-29 17:29:14

The Ultimate Solution for Welding Cast Iron: High-Performance Cast Iron Electrode

For professionals seeking reliable and durable welding solutions, cast iron electrode technology provides unmatched strength and efficiency.

2025-04-29 17:26:44

The Ultimate Choice for Precision Welding: High-Performance Stainless Steel Electrode

For industries that demand high-strength, corrosion-resistant, and long-lasting welds, stainless steel electrode technology offers unparalleled performance.

2025-04-29 17:24:06

Choosing the Best Carbon Steel Electrode for Superior Welding Performance

When it comes to high-efficiency welding, the selection of the right carbon steel electrode plays a critical role in ensuring strong, durable, and precise welds.

2025-04-29 17:21:37

Achieve Stronger, More Efficient Welds with Gas Shielded Welding Wire

For professional welders and industrial applications, gas shielded welding wire is the key to achieving high-quality, precise, and durable welds.

2025-04-10 16:35:47

Flux Core Welding Wire Improves Arc Stability and Welding Quality

With the rapid development of industrial manufacturing and construction fields, welding technology plays a crucial role in various engineering projects.

2025-04-10 16:34:09

The Importance of Gas Shielded Welding Wire in Various Fields

Gas shielded welding is a welding technique widely used in the metal processing industry.