-
Wear-resistant surfacing cored wire flux cored welding wire
Flux-cored wire is also known as powder-cored wire, tubular wire, it can be divided into two categories of gas protection and non-gas protection. The surface of flux-cored wire is made of low carbon steel or low alloy steel with good plasticity. The manufacturing method is that the steel strip is rolled into U-shaped section shape, then the welding powder is filled into the U-shaped steel strip according to the dosage, and the steel strip is rolled tight by a pressure mill, and finally drawn ... -
3.2mm carbon steel welding electrodes aws e7018 alloy steel electrode
CB-J507 is a carbon steel electrode for iron powder and low hydrogen and potassium type drug skin, which is dual-purpose in AC and DC. because the drug skin contains iron powder, the deposition efficiency can be improved. The arc is stable, the splash is small, the slag is easy to remove, the process performance is good, the mechanical properties of the deposited metal are good, and the whole position welding can be carried out.
Uses: Suitable for welding carbon steel and low alloy steel structures, such as 16Mn, etc.
-
Welding Rod Welding Carbon Steel Materials E6013 E7018
CB-J421 is a kind of carbon steel electrode with titania type coating. AC/DC. All position welding. It has excellent welding performance, excellent operating performance, easy reignition, stable arc and beautiful appearance of weld. Uses: For welding low carbon steel structures, especially suitable for welding on thin plates and cosmetic welding which requires the weld beads to be beautiful and glossy.
-
2.5-5.0mm carbon steel welding electrode aws e6011
CB-J425 is a kind of carbon steel electrode with cellulose potassium type coating specially used for vertical downward welding . AC/DC. It has excellent welding performance, beautiful appearance after vertical downward welding , fewer slags and high welding efficiency. Uses: Suitable for butt welding , fillet welding and lap welding on thin plates, such as low carbon steel structures like flues of power stations, air ducts, transformer oil tanks, hulls, exterior panels of cars, etc.
-
2.5mm small splash carbon steel welding electrodes aws e6013
Carbon steel electrode (the tensile strength of deposited metal is less than 500MPa or 50kgf/mm2) is suitable for welding carbon steel and low strength low alloy steel. For low hydrogen type and iron powder type electrode, the electrode must go through 350 ° C or above baking before welding, otherwise, there will be welding defects (such as porosity, slag inclusion, cracks, process performance deterioration, etc.) . The cellulose type electrode should be baked according to the baking temperat... -
Plastic Metal Spool Gas Protection Copper Coated
Introducing the welding wire AWS ER70S-6, the ultimate solution for all your welding needs. Whether you are a professional welder or a DIY enthusiast, this welding wire is designed to meet all your welding needs with precision and ease. Crafted with premium quality materials, this welding wire is designed to deliver reliable and consistent welding results. With its low spatter, excellent feedability and optimal performance, it is the perfect choice for any welding project. It is designed to w... -
supply stainless steel welding electrodes aws e308 e308l
TheweldmetalofE308/308Lisa19Cr-10Ni austenite microstructure which contains limitedō ferrite.
-
supply stainless steel welding electrodes aws e309 e309l
TheweldmetalofE309/309Lcontainsmore Cr Ni thanE 308/308L.
-
Stainless Steel Electrodes CB-A102
The stainless steel electrode use notice 1, chromium stainless steel has certain corrosion resistance (oxidizing acid, organic acid, cavitation) , heat resistance and wear resistance.
-
Stainless Steel Electrodes E316l-16
Stainless steel electrode can be divided into chromium stainless steel electrode and chromium nickel stainless steel electrode, these two types of electrodes in accordance with the national standard, are in accordance with GB/T983 -1995 assessment. Chromium stainless steel electrode use instructions, chromium stainless steel has a certain corrosion resistance (oxidizing acid, organic acid, cavitation) heat and corrosion resistance.
-
Stainless Steel Electrodes E347-16
Stainless steel electrode can be divided into chromium stainless steel electrode and chromium nickel stainless steel electrode, these two types of electrodes in accordance with the national standard, are in accordance with GB/T983 -1995 assessment.
-
Aluminum magnesium 5356 aluminum alloy argon arc welding wire
Argon arc welding wire is generally used ER309 wire or A302 electrode material welding. ER309 wire or A302 electrode material is suitable for joining high hardness steel, fixing steel mould base, making base buffer layer of cast steel mould hard surface, welding of crack, and argon arc welding have very good compatibility. The principle of argon arc welding technology is to use argon gas to protect metal welding material and melt the welding material on the welding base material by high curre...
