Wear-resistant surfacing cored wire flux cored welding wire

Product Detail

Product Tags

Flux-cored wire is also known as powder-cored wire, tubular wire, it can be divided into two categories of gas protection and non-gas protection. The surface of flux-cored wire is made of low carbon steel or low alloy steel with good plasticity. The manufacturing method is that the steel strip is rolled into U-shaped section shape, then the welding powder is filled into the U-shaped steel strip according to the dosage, and the steel strip is rolled tight by a pressure mill, and finally drawn into different specifications of flux-cored wire. As a whole, flux-cored wire can be divided into self-shielded flux-cored wire and gas shielded flux-cored wire. Gas shielded flux-cored wire is usually divided into two slag systems, namely, acidic and basic (T 1 and T 5) . The acid slag flux-cored wire has good performance and can be used in all-position welding. It is the most widely used typical high-efficiency welding material in shipbuilding industry. The weld metal of basic flux-cored wire has a good purification effect, and it can obtain excellent process performance by adjusting the proper formula, which is suitable for the position of flat welding and fillet welding.

Model	GB	AWS	Diameter(mm)	Current	Uses
CB E70T-1	E500T-1	E70T-1	1.2,1.4,1.6	DC+	Used welding structures made of carbon steel and low alloy structural steel with tensile strength higher than or equal to 490MPa.
CB E71T-1	E501T-1	E71T-1	1.2,1.4,1.6	DC+	Used for welding structures made of carbon steel and low alloy structural steel with tensile strength higher than or equal to 490MPa.

Mechanical Properties of Deposited Metal

Mechanical Properties of Deposited Metal
Model	Rm(Mpa)	Rel(Mpa)	A(%)	KV2(J)
CB E70T-1	≥480	≥400	≥22	≥27(-20︒C)
CB E71T-1	≥480	≥400	≥22	≥27(-20︒C)